Name: 
 

Chapter 2 Practice Test



True/False
Indicate whether the sentence or statement is true or false.
 

 1. 

Only one type of wireless NIC is available for laptop computers.
 

 2. 

CF cards consist of a small circuit board that contains flash memory chips and a dedicated controller chip.
 

 3. 

If a remote wireless bridge is in repeater mode it functions as a standard AP only and does not communicate with other remote wireless bridges.
 

 4. 

De facto standards are not actually standards at all.
 

 5. 

The IEEE 802.11g draft was a compromise based on input from several different chip (microprocessor) manufacturers, who had a major stake in the outcome.
 

Multiple Choice
Identify the letter of the choice that best completes the statement or answers the question.
 

 6. 

What is another name for a NIC?
a.
client network adapter
c.
access point
b.
mini PCI
d.
bridge
 

 7. 

A(n) ____ card improves input/output speed over a PC Card by increasing the bus width to 32 bits yet still supports lower-voltage PC Cards.
a.
mini PCI
c.
built-in
b.
CardBus
d.
access point
 

 8. 

A device called a ____ must sometimes be attached to a PDA in order to establish a wireless connection.  The device contains a slot for a wireless NIC or similar device.
a.
shoe
c.
sled
b.
slot
d.
bridge
 

 9. 

Which of the following statements describes the difference between a CF wireless NIC and a PC card?
a.
PC card is smaller than CF
b.
PC card consumes less power than CF
c.
PC card is larger than CF
d.
CF requires separate antenna to be built into monitor
 

 10. 

Beginning with Windows ____, all Microsoft desktop operating systems recognize a wireless NIC without the need for any external software drivers.
a.
NT
c.
2000
b.
ME
d.
XP
 

 11. 

An access point has a(n) ____ wired network interface that allows it to connect by cable to a standard wired network.
a.
IEEE 802
c.
compact flash
b.
RJ-45
d.
PCI
 

 12. 

Most industry experts recommend one access point for no more than ____ users if they are performing basic e-mail, light Web surfing, and occasionally transferring medium-sized files.
a.
10
c.
50
b.
30
d.
100
 

 13. 

How does an access point receive electrical power if it is mounted in a location that is not close to an electrical outlet?
a.
through radio waves
b.
through the unused wires in a standard unshielded twisted pair (UTP) Ethernet cable
c.
through a USB cable
d.
it must be mounted near an outlet
 

 14. 

Most bridges have what is known as ____ that minimizes the spread of the signal so that it can reach farther distances.
a.
delay spread
c.
scheduled delays
b.
interspersed communications
d.
multipoint scheduling
 

 15. 

Which type of remote wireless bridge connection is used to connect multiple LAN segments together?
a.
segment-to-segment
c.
point-to-point
b.
multipoint-to-multipoint
d.
point-to-multipoint
 

 16. 

If a remote wireless bridge is set to ____, it can only transmit to another bridge in root mode.
a.
access point mode
c.
non-root mode
b.
root mode
d.
repeater mode
 

 17. 

What function is performed by a wireless gateway?
a.
authentication
c.
bandwidth management
b.
encryption
d.
All of the above
 

 18. 

What is a disadvantage of standards?
a.
reduced competition
b.
devices produced by different vendors may not interoperate
c.
higher prices
d.
they can open domestic markets in larger countries to overseas competition
 

 19. 

Microsoft Windows has become the ____ standard operating system today for personal desktop computers and network servers.
a.
de facto
c.
consortia
b.
de jure
d.
All of the above
 

 20. 

Ultimately, who regulates standards that are developed by consortia?
a.
a regulatory body
c.
the government
b.
the marketplace
d.
the manufacturers
 

 21. 

What is the name for the computer network architecture standards developed by the IEEE?
a.
Project Athena
c.
Project 802
b.
Project Network
d.
Project 1000
 

 22. 

Which IEEE committee establishes standards for wireless wide area networks?
a.
802.3
c.
802.13
b.
802.11
d.
802.16
 

 23. 

When a business is registered as a ____ they are qualified be placed in an online database of wireless hotspot locations.
a.
Wi-Fi Alliance member
c.
SOHO
b.
Wi-Fi Zone
d.
WECA
 

 24. 

The radio frequency spectrum is divided into ____ different sections or bands.
a.
300
c.
900
b.
450
d.
1200
 

 25. 

The IEEE 802.11 standard outlines the use of ____ transmissions for WLANs.
a.
diffused infrared
c.
radio wave
b.
directed infrared
d.
gallium arsenide
 

 26. 

The 802.11b standard can support wireless devices that are up to ____ meters apart.
a.
30
c.
115
b.
90
d.
130
 

Completion
Complete each sentence or statement.
 

 27. 

A(n) ____________________ is a small card that is functionally equivalent to a standard PCI expansion card.
 

 

 28. 

Access points are typically mounted on a(n) ____________________ to reduce interference from surrounding objects.
 

 

 29. 

Remote wireless ____________________ are ideal solutions for connecting sites such as satellite offices, remote campus settings, or temporary office locations when the sites are separated by obstacles such as bodies of water, freeways, or railroads that make using a wired connection impractical or very expensive.
 

 

 30. 

The goal of a(n) ____________________ is to develop standard that promote their specific technology in a short period of time.
 

 

 31. 

____________________ bands are in effect bands of the radio spectrum that are available nationwide to all users, without requiring a license.
 

 

Matching
 
 
Match each term with the correct statement below.
a.
wireless gateway
f.
flash memory
b.
IEEE
g.
NIC
c.
bridge
h.
de jure standards
d.
mini PCI
i.
FCC
e.
de facto standard
 

 32. 

serves as the primary regulatory agency for wireless communications in the United States and its territorial possessions
 

 33. 

device that connects the computer to the network so that it can send and receive data
 

 34. 

device that combines wireless management and security in a single appliance
 

 35. 

type of solid-state (microchip) storage technology in which there are no moving parts
 

 36. 

common practices that the industry follows for various reasons, ranging from ease of use to tradition to what the majority of the users do
 

 37. 

small card that is functionally equivalent to a standard PCI expansion card
 

 38. 

standards that are controlled by an organization or body that has been entrusted with that task
 

 39. 

device that is used to connect two network segments together
 

 40. 

world’s largest technical professional society with members around the globe
 

Short Answer
 

 41. 

What are the steps involved in a wireless NIC transmission?
 

 42. 

What are the two functions of an access point?
 

 43. 

A remote wireless bridge can function in one of four different modes.  Describe each mode.
 

 44. 

List at least three advantages of standards for wireless technology.
 

 45. 

What are de jure standards?
 

 46. 

What are the current IEEE committees for wireless standards?
 

 47. 

What are the responsibilities of the FCC?
 

 48. 

Describe infrared transmissions as they are used for wireless networks.
 

 49. 

Describe the IEEE 802.11b standard.
 

 50. 

What is IEEE 802.11n?
 



 
Check Your Work     Reset Help