Back to Contents Page

Front-Panel Inserts

Dell™ OptiPlex™ GX400 Service Manual

  Removing Front-Panel Inserts

  Replacing Front-Panel Inserts

Removing Front-Panel Inserts

CAUTION: Before you perform this procedure, see "Precautionary Measures."

1. Turn off the computer and devices, disconnect them from their electrical outlets, wait at least 5 seconds, and then remove the computer cover.
   
   
2. Remove the front panel.
   
   
3. Hold the front panel with the front facing you.
   
   
4. Remove the front-panel insert for the chassis drive bay you want to use.
   
   

Use your thumbs to press the sides of the insert until it snaps free of the front panel.

Removing Front-Panel Inserts

Replacing Front-Panel Inserts

Position the two ring-tabs over the posts on the inside of the bay opening, and then press the ring tabs over the posts. See "Removing Front-Panel Inserts."

Back to Contents Page