Refer to the ACC Hazardous Materials Flow Chart  before taking any action to report or clean up a spill.
Reporting and Large Spills
These procedures are for chemical spills larger than 1 liter, chemicals that have a hazard rating of 2 or above, and for spills of an unknown chemical:
- Evacuate the immediate area, closing doors to area where spill has occurred. Restrict access to area.
- Call ACC Police  at 222 from a campus phone or 223.7999 from your cellphone.
- Provide the following information.
- Identity of the chemical spilled
- Quantity spilled
- Exact location
- Information on hazard ratings (look for NFPA / HMIS labels on containers or MSDS)
- Any injuries or chemical exposure
Handling Small Scale Chemical Spills
If hazardous material spill is less than one liter and has a hazard rating below 2 in all hazard categories, the following procedures should be followed.
- Instructional labs that contain any type of chemical should have a chemical spill kit available to deal with small spills.
- Laboratory supervisors must handle small-scale chemical spills in their lab.
- A small-scale spill is generally considered to be 1 liter or less and have a hazard rating of less than 2 in all categories.
When a small scale chemical spill occurs:
- Restrict access to area.
- Immediately notify the lab supervisor and others in the area of the spill.
- Mark the area to prevent others from coming in contact with the spilled material. Depending on what type of chemical is spilled, in may be necessary to evacuate the lab until the material is effectively cleaned up.
- During business hours, always immediately contact the Environmental Health, Safety, and Insurance Office  and notify them that a small-scale spill has occurred.
- Name of chemical
- Quantity spilled
- Location of spill
- MSDS Section on Precautions for safe handling and use.
- Use recommended Personal Protective Equipment.
- Follow other precautions listed in MSDS.
Simple Acid and Base Spills
Simple acid and base spills should be neutralized with an appropriate neutralizing agent.
- For acid spills (hydrochloric or sulfuric acid): Sodium bicarbonate, sodium sesqicarbonate or other derivatives are acceptable.
- For basic spills (sodium or potassium hydroxide): Citric acid would be a suitable neutralizing agent.
- Allow the spill time to neutralize (e.g., wait until the bubbling reaction stops).
- When using a neutralizing spill kit, these kits are buffered and will not have a bubbling action. Use care not to over-neutralize.
- Test the pH of the spill after the neutralization reaction has stopped with pH paper. Once a pH of between 6 and 9 has been achieved, the material can be transferred into an appropriate secondary container for disposal.
- The container will then be marked with the "Hazardous Waste" label identifying what material was cleaned up. Contact the Environmental Health, Safety, and Insurance Office  for assistance with labeling and for chemical waste pickup.
Note: Some acids cannot be neutralized and will require special procedures for spill clean-up. Some examples are chromic acid and hydrofluoric acid. Immediately contact the Environmental Health, Safety, and Insurance Office  when a spill of this type occurs.
Solvent Spills (benzene, or methylene chloride etc)
- Use an absorbent medium such as sand or vermiculite to absorb the spill and prevent runoff.
- Transfer the spilled material into an appropriate secondary container.
- Mark the container with the "Hazardous Waste" label and contact the Environmental Health, Safety, and Insurance Office  for a chemical waste pickup.
- Most solid chemical spills can be swept up and transferred directly to a secondary container after the spill occurs.
- Mark the container with a "Hazardous Waste" label and contact the Environmental Health, Safety, and Insurance Office .
Mercury spills require special cleanup procedures:
- Use the special Mercury Spill Kit when dealing with mercury spills. Instructions for cleanup are located on the Mercury Spill Kit container.
- For broken mercury thermometers, clean up spilled mercury as described above and collect mercury and broken thermometer in a sealable plastic bag for disposal. Contact the Environmental Health, Safety, and Insurance Office .
- For mercury spills greater than 1 thermometer, call ACC Police at 222 from any campus phone or 223.7999 from your cellphone.
- Bio-hazard spills have the potential of containing disease carrying organisms that can infect persons exposed to the spilled material, therefore it is critically important to handle biohazard spills appropriately when they happen.
- Spills involving bodily fluids (i.e., blood, plasma, saliva, biological cultures, etc.) should immediately be decontaminated with bleach or other disinfectant solution approved to kill pathogenic disease causing organisms including HIV and hepatitis viruses.
- If at all possible, have person generating fluids (their own) clean up any spill of bodily fluids.
- Appropriate personal protective equipment should be worn during any biohazard spill cleanup, including splash goggles, rubber or nitrile gloves and rubber apron or lab coat to protect the responder from self-contamination.
- Apply the disinfectant to the spilled material and leave for five to ten minute to allow the disinfectant to work.
- After the material has had time to be totally disinfected, use an absorbent medium to soak up liquids.
- The material should then be swept up and placed into an approved biohazard waste bag (red or orange with universal biohazard symbol on it.
- Place waste bag in the appropriate biohazard waste container for disposal.
- All bio-hazard waste not containing a cut/puncture hazard is to be considered regular bio-hazard wastes. This would include any type of blood or serum products, tissues, absorbent papers with biological contamination etc. These materials should be wrapped securely and then placed in an approved biohazard bag (orange or red with the official biohazard symbol on it). This bag is then placed into the cardboard boxes provided by the current vendor for this type of waste.
Contact Environmental Health, Safety, and Insurance Office /David Watkins 223.1034 with any questions on cleanup or waste labeling/disposal.